MIKE 3 has hydrostatic and non-hydrostatic options, and we applie

MIKE 3 has hydrostatic and non-hydrostatic options, and we applied the former in order to make a straightforward comparison with POM. The substantial difference between POM and MIKE 3 in our case is that the latter is used in a z-level formulation with either the Smagorinsky subgrid scale model turbulent closure (Smagorinsky 1963) for both vertical and lateral mixing or a second moment k-ε turbulence closure for vertical mixing. The Słupsk Furrow overflow is expected to depend strongly on the existing irregularities of bottom

topography, which can bias the flow performance and complicate the interpretation of the numerical simulation results on the transverse secondary circulation. For this reason it seemed worth starting with the Selleckchem BTK inhibitor numerical simulations of a channelized Doxorubicin solubility dmso gravity current in an idealized sloping channel, the size, geometry and initial salinity stratification of which are comparable to those of the Słupsk Furrow (Figure 3). For the sake of clarity, the x axis of the channel is directed eastwards, like the Słupsk Furrow. The channel is 300 km long, 40 km wide, and 150 m deep; its cross-section is parabolic in shape. The channel consists of 3 parts, each 100 km long, and only the central

part has a slope of 5 × 10−4. The channel is closed at x = 0 and x = 300 km. The finite difference grid cell size is 2/3 km in the x and y directions. Vertically there are 63 sigma layers in POM and 75 equal z-layers in MIKE 3, so that both models provide an identical vertical resolution in the mid cross-section of the channel (63 sigma or z layers being no more than 2 m thick). To achieve a more detailed vertical resolution of possible density inversions in BBL under the gravity current, the final runs of the sigma

coordinate POM acetylcholine and the z-coordinate POM were performed with 129 sigma layers and 150 z-layers, so that the vertical grid size did not exceed 1 m. The temperature distribution in an initially motionless channel was taken to be uniform at T = 5°C; the initial salinity field is shown in Figure 3. Heat and salt fluxes across the sea surface and bottom are absent, as is wind forcing; bottom friction is controlled by the roughness parameter (0.01 m). Note that the simulation of ocean overflows using an idealized topography of the model domain has been undertaken by several researchers. For instance, Ezer (2006) used an idealized topography of the Faroe Bank Channel (FBC) to simulate the FBC Overflow, and Umlauf et al. (2010) performed 2D numerical experiments in an infinitely long and deep channel with an idealized cross-section of parabolic shape and a constant down-channel tilt to simulate the bottom gravity current of saline water of North Sea origin passing through a small, 10 m deep and 10 km wide, channel-like constriction north of the Kriegers Shoal in the Arkona Basin, (western Baltic Sea) ( Umlauf & Arneborg 2009a).

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>