Among various hexacyanoferrates, one of the most promising cesium-selective reagents is potassium nickel hexacyanoferrate (KNiHFC), which displays high chemical resistance in acid and alkaline solutions, mechanical stability, and thermal this website stability [2, 9]. Polypropylene (PP) fibers and nonwoven fabrics are very attractive support in preparing nanocomposite adsorbents because of the low cost, good mechanical strength, chemical and thermal resistance of the PP base, and highly developed specific surface of the fibrous structure. In this study we propose a novel nanocomposite

adsorbent based on a KNiHCF-loaded GS-1101 order polypropylene fabric for Cs, which was prepared

by the radiation-induced graft polymerization https://www.selleckchem.com/products/Temsirolimus.html of acrylic acid monomer onto the surface of nonwoven polypropylene fabric, followed by in situ formation of KNiHCF nanoparticles within the grafted polyacrylic acid chains. The synthesized adsorbent was used for the removal of Cs ions from the model solutions in batch mode, and the influence of contact time, pH, and presence of sodium ions on the adsorption process was investigated. Methods Materials Nonwoven material made of polypropylene fibers, available from Saehan Filter Co., Ltd. (Cheongju, South Korea), with an average thickness of 1 mm was used for the synthesis of the nanocomposite adsorbent. Analytical grade NiCl2 · 6H2O (Duksan Pure Chemicals Co., Ltd., Ansan-si, South Korea) and K4[Fe(CN)6] 3H2O (Sigma-Aldrich, St. Louis, MO, USA) were Levetiracetam used to prepare experimental solutions, respectively. Nonradioactive CsCl (Dae Jung Chemicals & Metals Co., Ltd., Shiheung City, South Korea) was used as a surrogate for 137Cs because of its identical chemical characteristics.

All working solutions were prepared using deionized water; pH was adjusted with a suitable quantity of NaOH and HCl, monitored with a digital pH meter. All experiments were carried out at ambient temperature. Preparation of the KNiHCF-loaded polypropylene fabric The composite material based on the nonwoven polypropylene fabric with chemically bound KNiHCF nanoparticles was synthesized through a two-stage experiment. At the first stage, the chemically inert polypropylene base was activated through the radiation-induced graft polymerization of acrylic acid monomer (AA) for the introduction of chemically active carboxyl groups onto the surface of PP fibers through covalent bonding between grafted polyacrylic acid (PAA) chains and PP base [10]. Grafted fabric samples with a medium value of AA grafting degree (120% to 170% and carboxyl group density of 6.0 to 7.5 mmol/g) were taken for the experimental work.